Ctrlk
Admin Portal
For the complete documentation index, see llms.txt. This page is also available as Markdown.

Epson USB Label Printer Configuration

Epson TM_L100 can act as a label printer.

1

Hardware Preparation

  • Turn on the printer

  • Load paper into the printer tray

  • Connect the printer to your device via USB cable

2

Access POS Settings > Printer & Scanner

Click Printer & Scanner in the POS settings.

3

Set Label Printer to EPSON USB

Under Label Printer, choose EPSON USB.

4

Connect the Printer

This configuration is based on your operating system:

A popup will appear requesting device connection permissions. Select Allow to proceed.

From the Label Printer settings, click on USB device. A popup will display available USB devices. Select your printer from the list then click Connect to establish the printer connection.

Step 1: Install Zadig Software

Download and install Zadig, a USB driver management tool required for Windows printer connectivity.

https://zadig.akeo.ie/

Step 2: Configure Zadig

Open Zadig application. Click Options and enable List all devices option

Step 3: Select Printer Device

From the device list, locate Printer Gadget.

Step 4: Install Driver

Ensure the target driver is set to WinUSB then click Install WCID Driver.

Step 5: POS Configuration

From the Label Printer settings, click on USB device. A popup will display available USB devices. Select your printer from the list then click Connect to establish the printer connection.

5

Configure Label Printer Settings

Configure additional settings as needed. Refer to this documentation: Label Printer Settings.

6

Test Configuration

Press the Test button to verify printer connectivity. This will print something out.

If the paper is feeding but no text is printed, the paper roll is like loaded incorrectly. Flip the paper to ensure the thermal side of the paper is facing the correct direction.

PreviousEpson Label Printers
NextEpson LAN Label Printer Configuration

Last updated